ArtResin 2 x 237ml

ArtResin epoxy is a resin that is food approved in the USA (conforms to ASTM D4236). The resin has many other good key properties such as:

• Very UV resistant
• Crystal clear
  
• High gloss
• Safe to use

To cover a painting or other surface, do this:

1. Prepare a water bath (approx. 50 °C warm)
2. Measure the casting resin and hardener into two mixing cups. It should be equal parts.
3. Place both parts in the water bath. This causes many of the bubbles to disappear. Let them stand for 2-3 minutes, stirring occasionally.
4. Take them out of the water sheet and add the hardener to the casting resin. Stir gently but thoroughly for 3 minutes. Be careful that no water gets into the mixture.
5. Now the resin is ready to be poured over the object. If you want to color the resin, do that now too.
6. Help the resin on its way by spreading it with a spatula or similar if necessary.
7. Now use a torch to smooth the resin and remove any bubbles.
8. Cover your work with something so that no dust or other things get into the cast resin during drying.
9. Wait 24 hours. Then the resin is hard enough to hang on the wall or similar. It will continue to get harder and harder for 3 weeks.

Volume:
2x118 ml (total 236 ml)

This kit is just enough to whet your appetite. Warning, it can be addictive.

Artresin is designed to be used as a coating resin and should not be applied in thicker layers than approx. 6 mm, however, you can cast many such layers to build thickness. If you cast thicker layers than that, you should be aware that the air bubbles will be difficult to remove and the resin may be overheated during curing.